|
Basic TV Hookup with a Cable Converter
To hook up your TV:
- Carefully screw the cable coming from the wall outlet onto the connector
marked "IN."
- Carefully screw the cable going to your television onto the connector
marked "OUT."
- Plug in your cable box, but do not turn the cable box on. You will
see some symbols flashing in the window on the cable box. It will then
go blank for a short period of time. This means that your box is receiving
data from our hybrid fiber optic network. This normally takes less than
five minutes. When a clock appears in the window, it's finished.
- Make sure your television is on and set to Channel 3. Turn on your
cable box.
back to diagrams page
or select another from list below:
Basic Cable-Ready TV Hookup with a Cable Converter
Basic TV Hookup with a Cable Converter
Basic TV Hookup without a Cable Converter
Various VCR Hookup Options (basic, extended, A/B switch)
Explorer 2000 Converter Configuration and Tips
Scientific Atlanta 8600X Converter Configuration and Tips
TV, Stereo, VCR and DVD or Game Console Hookup
|
