|
Basic Cable-Ready TV Hookup with a Cable Converter
There are TV sets on the market today called "cable-ready." These are capable of receiving most of the channels available with Time Warner Cable without a converter
box. However, if you subscribe to Cinemax, the Disney Channel, Showtime,
CablePlus or any of our multi-channel services, a converter is necessary
to descramble the picture. The same is true in order to take advantage of
pay-per-view service. Using your VCR with your cable television service
is easy; just
follow the setup instructions below:
- Tune your cable television converter to the channel you wish to record.
- Tune your VCR to channel 3.
- The VCR will now record desired channel.
- If you wish to use the timer recorder, set timer for desired times
to be recorded on channel 3 on the VCR. Then leave the converter turned
on, tuned to the channel you wish to record.
NOTE:
- On the back of your VCR is a channel 3/4 switch. This switch should
be set to channel 3.
- The above instructions are the recommended setup procedures for Time
Warner Cable customers with converters. These instructions may vary
from those listed in your VCR manual.
The image below shows the cable connection:
back to diagrams page
or select another from list below:
Basic Cable-Ready TV Hookup with a Cable Converter
Basic TV Hookup with a Cable Converter
Basic TV Hookup without a Cable Converter
Various VCR Hookup Options (basic, extended, A/B switch)
Explorer 2000 Converter Configuration and Tips
Scientific Atlanta 8600X Converter Configuration and Tips
TV, Stereo, VCR and DVD or Game Console Hookup
|
